How To Make Crack Cocaine On A Spoon



Crack recipe in spoon Hey could you please help me cooking crack on a spoon, I want to know the amount of the ingredients, how much cocaine, how much baking soda how much water and how long should i keep the fire under the spoon i mean when will i know that the crack is done and when is done what do i do with the residual water if i just keep. You need cocaine, some water, and a pinch of baking soda. Put them all in a spoon and heat the bottom of the spoon with a lighter or any open flame. Used base in making crack, a metal spoon, a tealight, and a cigarette. High to high heat until all of the baking soda has finished bubbling out.

Well I'm just back from the National Conference on Injecting Drug Use and I can honestly say it was one of the best yet. The high point for me was the last session in which Jon Derricott presented a film on crack cocaine production and its preparation for injection, this film contained plenty of learning points for drugs workers and injectors alike ...

Production Stage

The film covered small scale (on the spoon) production of cocaine into crack using both the ammonia method and the bicarb method. Both of these appeared to require plenty of patience from the user, but the bicarb method seemed far more quick and simple. With ammonia the process seemed to take ages and the residue that would become crack had to be constantly teased from the edges of the spoon. Of course if you've ever done this yourself or even researched about it in books or online then this is nothing really new to you, the interesting bit was still to come....

Preparation Stage

There has been a lot of talk on the UKHRA discussion list of the last few months about the right way to cook crack for injection, and whether or not some of the problems from crack blocking pins is due to wax being used by dealers to bulk out rocks.

The crack used for the cooking up was the crack that had been made in the previous part of the film. The first attempt involved the crack being heated in water with no citric, the crack melted and floated on the water but as soon as the heat was stopped this quickly became a solid again (in just 14 seconds) Jon suggested that this could be the source of the idea that wax is used. The interesting part was that no matter how much citric was added after this stage the crack would not become a solution again.

The second attempt was using warm solution that heroin had just been cooked in this of course already contained citric, the crack smeared onto the bottom of the spoon and again wouldn't easily go into a solution

The last attempt involved cooking the crack using no heat at all and just a small amount of citric, although this did take some time (which Jon admitted could have been shortened by pre-crushing the rock) it did become a clear solution. Once in solution they then added heroin and heated to check if there would be any issues with heating at this stage. No issues, and the solution stayed stable for days.

What this all means

It's pretty clear from this (and from a previous talk by Ross Coomber) that it's unlikely that anyone does add wax into the rocks they are selling and that the times people talk about getting crack with wax in then needle exchange workers should be talking with them over thier cooking process in detail.

Crack should be cold cooked for injection, although this does take time it is the only real way to ensure a good solution.

If mixing heroin and crack then the crack should be prepared first, this is of course slightly different to previous advice some of us have given about adding the crack in last.

How to make crack cocaine on a spoon step by step

I did talk to Jon after the presentation and the intention is to release this film as a DVD training aid, I for one look forward to seeing the finished product.

If you want to know more you can check Jon Derricott's abstract for the conference, and Ross Coomber's abstract on drug composition.

Update

About a year after writing this I asked Jon when the film was going to be released, he said due to technically problems there's now no likelihood that this will be released.
Nigel Brunsdon is the owner of Injecting Advice.com. He's been working in harm reduction since the 1990's, although he's previously a frontline needle programme worker he now spends most of his time developing online resources for drugs workers and users.
Please enable JavaScript to view the comments powered by Disqus.blog comments powered by Disqus

How To Make Crack Cocaine On A Spoon Without

With the prevalence of crack, making one’s own seems a little pointless. Why bother with the process at all when you can hit the corner or dial up a $20 and be on the higher plane that much faster? There are a few good reasons why anyone who likes coke and wants to get a bigger rush, without using it IV, should make their own base as opposed to buying street product. But first some basics;

Powder coke is cocaineHCl, that means it is a salt, a hydrochloride salt to be precise, of cocaine base. Cocaine is produced first in the base form, then dissolved in acetone, and reacted with hydrochloric acid to form cocaine hydrochloride. CocaineHCl is for snorting, because it is water soluble, you can smoke it sprinkled in a doob or a hand rolled smoke, but you can’t smoke it in a pipe because the heat level required to vaporize it also breaks down the compound itself. Cocaine base is easily smoked in a pipe on a bed of ash, or in a crack pipe with coarse steel wool.(brillo) When you freebase, you react the HCl ion with a base, removing it from the cocaine, leaving simple cocaine base, which is good for smoking. Some adulterants, meth in particular, will still be there, but it will be smokeable regardless.

Making your own base means you are not at the mercy of whomever cooked the shit up, and even though most people will tell you that crack is just cocaine base, any dealer with an eye for profit can doctor it in numerous ways. If you want base, find some good quality powder(yes I know it comes in chunks), and follow the instructions.

Baking soda base;

Find a good sized soup spoon and clean it. Measure out the amount of powder you want to base in a pile, and make a pile of baking soda beside it about 1/3 the size. I would recommend about .2 of a gram of cocaine to start with. Do not use baking powder, it is different, do not use soda that has been sitting in the fridge for 3 months.

Chop the piles together and put them in the spoon. Balance the handle end of the spoon on a thin book so that the bowl of the spoon is level. Using an eye dropper, or a bottlecap, drip water into the spoon till the soda and coke are covered, and a little bit more besides. Hopefully you are using a big spoon, and the water level is about halfway up.

Sometimes it starts to react right away, and will fizz a bit. Stir it with a toothpick or a match a bit if you want. Pick up the spoon and heat it gently with a lighter held about an inch or two below the spoon. The reaction should fizz away for a while, make sure it does not get too hot, high temperatures break down cocaine, and overcooking can screw up your batch. Slow and steady. Heat it until the reaction stops, and little clear
islands of the good stuff are floating in the spoon.

Now a little technique comes into play, you can skip this if you want. Swirl the contents gently to encourage the little globs of freebase to merge, this will make it a little easier to deal with later.

If you have really shitty coke full of glucose and manitol, you might notice that not much has come back. Some shit blow is less than 20% real coke, so sorry about your luck, and if you have a bunch of shitty coke go to the ether method at the bottom, it is from the 70’s when all the coke was garbage.

Now you wait, putting the spoon in the freezer helps a bit, but sometimes this takes a subjective eternity. The clear oily bits should form into little hard chunks. Wait a little bit more, sometimes they might look solid but are still a little sticky. If you started with good coke you should have a few big pieces and some shrapnel, take the biggest one and proceed to “Smoking it” If it is still in little tiny pieces, dump it out onto a flat coffee filter and scrape up your goods.

Ammonia base;

For this procedure use only hydrous ammonia with no detergent or scent additives(unless you like lemon scented base). This is sometimes a little hard to find, usually “sudsy” original brand is good, and so are a lot of discount brands. Look for words like Pure on the label.

Take your spoon and balance the handle end on a small book so the spoon bowl is level. Toss in your blow, again about .2g is optimal. Use an eye dropper or bottlecap to pour the ammonia over the blow till it is covered, and a little bit more. It will be a less vigorous reaction than the soda method, but it will fizz a bit. Heat gently, and you should eventually get the same result as the soda method. I advise rinsing rocks made this way

The ammonia/ether method;

This is some serious shit. It is for making large quantities of shitty coke into something useful, or for people who are familiar with the dangers of ether. I have only watched this being done, but the results were fucking amazing. So I will try to pass it on.

Getting clean ether is important, the person who showed me this used industrial grade ether. Get ether from a reliable source, if you are tempted to use “starter ether”, which is sprayed into diesel engines to help them fire up, have fun, there are a lot of articles on how to clean it.

Take your blow, and I would recommend at least .5g, and put it in a 2oz shot glass. Add ammonia until the shot is 1/3 full, it will start to fizz and you should stir it with a toothpick until the reaction calms down. Then use an eyedropper to add the ether one drop at a time, stirring it a little after each addition. The ether will settle to the bottom of the shot glass. Once you have the glass about 1/3 full of ether and the rest ammonia, put your palm over the top of the shot glass and while keeping it right side up, shake it gently for a good long time, at least a couple of minutes.

Now you are wondering what the hell happened to my coke? Don’t worry, it’s still there, it is just in solution with the ether. Now take the eye dropper, squeeze the bulb, put the end right down to the bottom of the shot glass and draw up some of the ether. Then put the eyedropper over a good sized piece of glass and slowly pinch the bulb so the ether drips out a drop at a time. Allow each drop or two to evaporate before dropping more. The white/yellow stuff forming on the glass is the purest cocaine freebase you will ever get. Scrape it up with a blade, and enjoy.

Smoking it; Use a good steel pipe with a fine screen, place some cigarette or joint ash on the screen, it has to be a fair bit, enough that if it was weed it would be a good bowl, and place your base on top of it. Put a lighter to it and draw in a moderate way, not too fast, not too slow. Exhale a massive cloud of smoke. Feel fucking great for 73 seconds, then chase the rainbow for the rest of the night. Also, you can smoke it in a stem, but setting up each hit nicely will slow you down a bit, and if you do too much good base at once you can have a seizure and die choking on your tongue while your friends fight over who gets your next hit.

How To Make Crack Cocaine On A Spoon Without

C/O
“now that’s entertainment”

Make Crack Cocaine In A Spoon

Discuss http://www.totse.info/bbs/showthread.php?t=10864